ASUS ROG Thor 1000W Platinum III Modular Power Supply

Description

1000W 80 PLUS Platinum Power | PCIe Gen 5.1 Ready | GaN MOSFET Efficiency | Magnetic OLED Display | 10-Year Warranty

Quick Specs

• Achieve elite-level power delivery with 1000W of 80 PLUS Platinum-certified output for your most demanding build
• Experience next-gen GPU readiness with a PCIe Gen 5.1 16-pin cable capable of delivering up to 600W to your graphics card
• Enjoy whisper-quiet operation below 15 dB thanks to Cybenetics Lambda A++ certification and 0dB fan technology
• Monitor your system’s real-time power draw at a glance with the signature magnetic OLED display
• Build with confidence backed by a 10-year warranty and full ATX 3.1 compliance

Ultimate Power for Uncompromising Builds

The ASUS ROG Thor 1000W Platinum III is built for the discerning builder who refuses to compromise — the flagship gaming rig, the heavily overclocked workstation, the next-gen GPU powerhouse that demands every watt it can get. Fully compliant with the ATX 3.1 standard and equipped with a PCIe Gen 5.1 16-pin cable capable of sending up to 600W to a single graphics card, this PSU is engineered to keep pace with today’s most power-hungry hardware without breaking a sweat.

GaN MOSFET and GPU-First Voltage Stability

Tired of voltage fluctuations robbing your GPU of its peak performance? The ROG Thor 1000W Platinum III addresses this with an innovative GaN MOSFET that delivers up to 30% more power efficiency than conventional MOSFETs, while its smaller footprint allows for a more organised internal layout with larger heatsinks and better airflow. The patented ‘GPU-First’ intelligent voltage stabiliser (IVS) enhances voltage stability by up to 45% by sensing and prioritising power delivery directly to your graphics card — smoothing out the demands of the most intense gaming sessions and overclocking scenarios.

Platinum-Certified Efficiency, Near-Silent Operation

Earning both 80 PLUS Platinum and Cybenetics Platinum certifications, the ROG Thor 1000W Platinum III leverages low-ESR Japanese capacitors for industry-leading efficiency, reduced heat generation, and improved acoustics. The Cybenetics Lambda A++ certification confirms noise output averages below 15 dB — practically inaudible under typical loads. The PWM-controlled dual-ball-bearing fan shuts off entirely when the PSU is operating at or below 30% load in standard mode, and a dedicated 0dB button gives you additional control over fan behaviour as your system transitions between load levels. Dual-ball bearings are rated for up to 80,000 hours of operation — twice the lifespan of sleeve bearing designs.

Magnetic OLED Display, Turbo Mode, and Aura Sync

The ROG Thor 1000W Platinum III goes beyond raw performance with a suite of experience-focused features. The signature magnetic OLED display shows real-time power draw at a glance, and because it attaches magnetically, it can be swapped to either side of the unit to suit fan-up or fan-down PSU installations. Turbo Mode unlocks support for extended power excursions, giving overclocking enthusiasts the headroom they need when pushing hardware to its limits. Etched modular cables in a pliable premium material make routing and management effortless, while Aura Sync ARGB support lets this PSU integrate seamlessly into a synchronised lighting setup.

Features

• GaN MOSFET delivers up to 30% greater power efficiency than standard MOSFETs, with a compact design allowing for improved internal airflow and larger heatsinks
• Patented ‘GPU-First’ intelligent voltage stabiliser (IVS) enhances voltage stability by up to 45% for consistent GPU performance during demanding workloads and overclocking
• PCIe Gen 5.1 16-pin connector supports up to 600W power delivery to next-generation graphics cards; fully ATX 3.1 compliant
• 80 PLUS Platinum and Cybenetics Platinum certified for industry-leading efficiency using low-ESR Japanese capacitors
• Cybenetics Lambda A++ certified — average noise output below 15 dB for near-silent operation
• Magnetic OLED display shows real-time power draw; repositionable to either side of the unit for fan-up or fan-down installation
• 0dB fan technology: fan shuts off entirely at or below 30% load; dedicated 0dB button for additional fan control
• Dual-ball-bearing fan rated for up to 80,000 hours — twice the lifespan of sleeve bearing designs
• Turbo Mode supports extended power excursions for overclocking and high-demand scenarios
• Fully modular cable system with etched, pliable premium cables for effortless cable management
• Aura Sync ARGB support for integrated lighting synchronisation
• Comprehensive protections: OPP, OVP, UVP, SCP, OCP, OTP
• 10-year warranty included

Specifications

• Wattage: 1000
• Efficiency Rating: 80+ Platinum
• Modularity: Full Modular
• Form Factor: ATX
• ATX Standard: ATX 3.1
• 12V-2×6 / PCIe Gen5 Connector: Yes
• Colour: Silver/Black
• Warranty: 120 months
• Product Dimensions (L x W x H): 19.0 x 15.0 x 8.6 cm
• Product Weight: 2370g

What’s in the Box

• ASUS ROG Thor 1000W Platinum III Power Supply – Silver/Black x1
• Power Cord x1
• Motherboard Power Cable (610mm) x1
• CPU Cable (1000mm) x2
• PCIe Gen 5.1 16-pin Cable (750mm) x1
• PCIe Cable 1-to-1 (750mm) x4
• SATA Cable 1-to-4 (400+120+120+120mm) x1
• SATA Cable 1-to-3 (400+120+120mm) x1
• Peripheral 1-to-3 (400+150+150mm) x2
• Addressable RGB Cable (800mm) x1
• ROG Sticker x1
• ROG Cable Tie x6
• Chassis Screws Package x1
• Cable Tie x12
• User Manual x1

Why ASUS

ASUS ROG — Republic of Gamers — has spent decades engineering hardware for those who demand the absolute best. Every ROG product is built to a standard that refuses to compromise between performance and reliability. The ROG Thor 1000W Platinum III is a statement of that commitment: a power supply worthy of the most ambitious builds South African enthusiasts can dream up.

Additional information